MBS60K-32 HAKRC BLHeli_S 32-bit 60A 2-6S ESC 30.5x30.5mm Dshot OneShot PWM for FPV Racing RC Drone
Regular price
$66.99
Sale price
$75.99
MBS60K-32 HAKRC BLHeli_S 32-bit 60A 2-6S ESC 30.5x30.5mm Dshot OneShot PWM for FPV Racing RC Drone
Power Supply: 2-6S
Maximum continuous working current: 60A
Maximum instantaneous working current: 70A
Signal mode: dshot150/300/600/1200, PWM, oneshot125, oneshot42 and multishot
Firmware Version: bl32.7
Installation hole: 30.5x 30.5mm
PCB size: 45x 42.5x6mm
net weight: 14.5g
Features:
High quality hardware
Stm32f051 is the main control chip, and the operation frequency is as high as 48mhz. MOSFET, three in one IC driver and high quality high frequency ceramic capacitor are imported. In high-end PCB production process, pads are metallized to avoid pad falling off when using; 3 oz copper thick, 6-layer board, greatly reducing heating and higher efficiency.
Native support for blheli-32
Using blheli-32 firmware has powerful performance and rich functions; it also supports various ways to set electric tuning parameters, or to upgrade electric tuning firmware (for example, setting or upgrading electrical tuning via throttle signal line, using other development boards, or using cleanflight or betaflight firmware flight control).
DShot150/300/600/1200 Ready
Not only supports ordinary PWM throttle signal mode, oneshot125, oneshot42 and multishot ultra-high speed throttle signals, but also supports the latest dshot150 / 300 / 600 / 1200 digital throttle, with strong anti-interference ability and rapid response. Soft silicone wire is used for input and output line, which is very durable, high temperature resistant and easy to weld.
Power Supply: 2-6S
Maximum continuous working current: 60A
Maximum instantaneous working current: 70A
Signal mode: dshot150/300/600/1200, PWM, oneshot125, oneshot42 and multishot
Firmware Version: bl32.7
Installation hole: 30.5x 30.5mm
PCB size: 45x 42.5x6mm
net weight: 14.5g
Features:
High quality hardware
Stm32f051 is the main control chip, and the operation frequency is as high as 48mhz. MOSFET, three in one IC driver and high quality high frequency ceramic capacitor are imported. In high-end PCB production process, pads are metallized to avoid pad falling off when using; 3 oz copper thick, 6-layer board, greatly reducing heating and higher efficiency.
Native support for blheli-32
Using blheli-32 firmware has powerful performance and rich functions; it also supports various ways to set electric tuning parameters, or to upgrade electric tuning firmware (for example, setting or upgrading electrical tuning via throttle signal line, using other development boards, or using cleanflight or betaflight firmware flight control).
DShot150/300/600/1200 Ready
Not only supports ordinary PWM throttle signal mode, oneshot125, oneshot42 and multishot ultra-high speed throttle signals, but also supports the latest dshot150 / 300 / 600 / 1200 digital throttle, with strong anti-interference ability and rapid response. Soft silicone wire is used for input and output line, which is very durable, high temperature resistant and easy to weld.
Fill in the following FORM or send email to support@hbfpv.com directly