AF405GE JHEMCU GSF405A 1-2S AIO F405 4in1 5A with built-in ELRS receiver 5 Uarts LED Blackbox Barometer OSD

AF405GE JHEMCU GSF405A 1-2S AIO F405 4in1 5A with built-in ELRS receiver 5 Uarts LED Blackbox Barometer OSD

JHEMCU GSF405A(AF405E) is a 1-2S F4 AIO with integrated 4-in-1 5A ESC and ELRS 2.4G receiver. It has 5 serial ports (UART1, UART2, UART3, UART4, UART6), one I2C port, and one SBUS interface. (The serial port used by SBUS is RX2), onboard a WS2812 LED light, and WS2812 LED pads. Also built-in 8MB blackbox and BMP280 barometer, buzzer interface, camera interface.

GSF405A AIO FC has the built-in full ELRS receiver, connected on the UART1 port. It is not an SPI receiver, so it the ELRS firmware can be updated via Wi-Fi or Betaflight serial passthrough. ELRS firmware target is DIY_2400_RX_ESP8285_SX1280.

Flight control parameters:
CPU: STM32F405(168MHz)
Gyroscope/Accelerometer: MPU6000
OSD: AT7456E
Barometer: BMP280
Black box: 8MB
I2C: Support
BEC: 5V 1A
UART: UART1 (ELRS), UART2 (external RC), UART3, UART4, UART6
USB: micro USB
Size: 25.5*25.5MM M2
Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DSM2, DS MX
Support programmable LED such as WS2812
Support buzzer
Built-in voltage and current sensors
Weight: 3.3 grams

ELRS RX parameters:
Frequency: 2.4GHZ
Working Agreement: CRSF (Betaflight)
Firmware: DIY_2400_RX_ESP8285_SX1280

ELRS receiver indicator status:
Double flash: code matching mode
Slow flashing: No transmission signal received
Steady on: Received transmit signal

Binding Steps:
Connect USB to power on the AIO board. After inserted the USB for the first time, disconnect the USB as soon as the LED turns off. Repeat this operation twice. When inserting for the third time, the LED started to double-flashing , that means receiver entered the binding mode.

ESC parameters:
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 1S-2S Lipo
Continuous current: 5A
Firmware: BLHELI_S S_H_50_REV16_7.HEX