EWRF 5.8G AV TX OSD Setting EWRF 5.8G Audio/Video transmitters work well with several other commonly used Betaflight/Cleanflight FCs when using OSD setting. Almost all F3 and F4 targets (except for those with integrated VTX) are supported. Below is the guide on how to use OSD setting to change your AV transmitter’s parameters. EWRF 5.8G VTXs only support setting of bands, channels, power and Pitmode at the present.
EWRF e7087U Quick User Guide PDF Manual Please click here 1. LED indication The red LED indicates the state of working mode or the item when setting the VTX(flashing 1 time means selecting the channels, flashing 2 times means selecting the bands, flashing 3 times means selecting the power levels). The blue LED indicates the state of Pitmode or the value of item when setting the VTX( e.g. when selecting the channels, 3 times of flashing means channel 3. When selecting the bands, 3 times of flashing means band C.As for the item of power levels,3 times of flashing means…
CADDX Turtle V2 OSD Panel Quick operation guide: 1. RIGHT BUTTON: Press the RIGHT button for 3s-5s to activate video recording, in the meanwhile the light on the lower right corner will flicker. 2. LEFT BUTTON: Press the LEFT button for 3s-5s to stop video recording. 3. DOWN BUTTON: Press the DOWN button for 3s-5s to switch the resolution, 720P with Blue LED on, 1080P with Red LED on, the default mode is 1080P. 4. MIDDLE BUTTON: The MIDDLE button is the menu button. Notice: The camera need at least 8G Class 10 SD card. Notes: If the power is…

Everyone is looking for

关注我们的公众号

微信公众号